CRC RUST OFF (RUST SOLVENT / LUBRICANT PENETRATING WITH MOS2) 250ml

Description

Fast penetrating and absorbing lubricant.
A rapidly penetrating product that penetrates dirt and scale to attack rust and corrosion and release corroded fasteners, valves and metal components. Its low surface tension formulation quickly dissolves rust, scale and corrosion, helping to disassemble tightly-fitting assemblies and fasteners with a small gap.
Penetrates quickly into hard-to-reach places.
Dissolves rust, scale and other oxide compounds.
Releases metal parts seized by dirt, rust, corrosion, or dried oil sludge.
Facilitates the disassembly of mechanical components, fittings, assemblies, nuts, bolts, and other small clearance fasteners
Forms a strong lubricating film MoS2.
Reduces wear and facilitates subsequent disassembly.
Reduces maintenance costs.
Reduces the percentage of scrap jammed parts.
Silicone free.
Safe on all metal surfaces and most plastic and rubber materials (if in doubt, check before use).
Aerosol cans are equipped with a valve (works in any position of the can) and an additional tube for ease of use.
Aerosols are pressurized with a non-flammable CO2 propellant gas, which allows the full cylinder volume to be used by 97%.
Seized and corroded nuts and bolts
Locks and latches
Screw connections
Assembly equipment
Corroded fasteners
Valves
Chains and conveyors
Agricultural equipment
Instructions
Apply liberally to the surface to be treated. For hard-to-reach places, use the optional attachment.
Leave it on for a few minutes; lightly tap the joint for better penetration.
Repeat as needed to loosen severely seized fasteners, joints, and sub-assemblies.
Use CRC Brakleen Pro or CRC Power Clean Pro to remove the product.
Track Page Views With
Auctiva's FREE Counter